iTan Pro with M Series Gun manualApril 20, 2022 2022-04-20 17:15
iTan Pro with M Series Gun manual
Your ITan Pro with the M series gun is renowned throughout the industry for it’s reliability and performance.
- 1 x ITan Pro
- 1 x Quick Release Hose
- 1 x The M series gun
- 1 x Set of feet (or wall mounting attachments)
- 1 x Manual
SETTING UP YOUR M SERIES GUN
Check the silver nozzle on the front of the gun is in a vertical position.
The plastic tube inside the top of your M series gun is firmly in place.
2. FILLING THE CUP OF YOUR M SERIES GUN
Unscrew solution cup and Fill Solution Cup no more than ½ – ¾ full. Over filling the solution cup may cause the cup to leak.
Screw the cup back into the top of your M series gun and firmly tighten.
Be careful not to over tighten as this can cause the solution cup to cross thread.
3. MANAGING THE VOLUME OF TANNING SOLUTION
The large silver nut at the back of your M series gun under the silver hose connection is where you manage the flow of tanning solution. Turning it clockwise until it can go no further turns off the flow of solution.
To obtain the perfect mist when tanning slowly turn the silver nut anti-clockwise to open up the flow and adjust accordingly. Check volume by spraying onto a piece of cardboard.
Solution should not be too heavy as this will negatively impact on your tan and waste your tanning solution.
4. ATTACH THE HOSE TO YOUR GUN
Pull back the nozzle on your quick release hose (similar to how you connect a garden hose) and place it on the silver connector located at the top/back of your M series gun it should click firmly into place.
SETTING UP YOUR ITAN PRO COMPRESSOR
1. ATTACH HOSE TO THE I TAN PRO COMPRESSOR: FIG 3 ON PARTS
Insert hose into the unit with the bayonet style fitting and turn clock-wiseuntil firmly in place. Avoid over tightening as this may result in broken components.
2. ATTACH THE POWER CORD: FIG 3 ON PARTS
Attach power cord into the side of your I Tan Pro Compressor and then plug it into the power point and turn on when ready. Always turn your machine off at the
power point when you have finished tanning.
3. TURN ON POWER BUTTON: FIG 2 ON PARTS
HANG IT, STAND IT
CARE & MAINTENANCE OF YOUR EQUIPMENT
M SERIES GUN
STEP 1: REMOVE EXCESS SOLUTION
Unclick the hose from the back of your M series gun and place the gun into a washable surface.
Unscrew the cup from the top of the gun and place on the bench top. Wearing gloves remove remaining tanning solution from the cup and pour back into the bottle. Store tanning solution in a cool, dark dry place 20 degrees or lower.
STEP 2: RINSE
Rinse the cup with warm water ensuring all grooves near the top of the cup are free of tanning solution.
STEP 3: FILL
Now fill the solution cup with warm water or Black Magic Tan Gun Wash and screw the cup back onto the top of the spray gun.
STEP 4: FLUSH GUN
Next turn your machine on and turn the silver nut that manges the flow of your tanning solution up high and flush the water through to remove tanning solution residue.
STEP 5: RE-SET
Re-set the tanning solution volume and dry the inside and outside of the cup and store ready for the next tanning session.
I TAN PRO COMPRESSOR
STEP 1: CLEAN
Clean the Compressor with a cloth. Avoid using anything abrasive.
STEP 2: FILTERS
Remove the filter from the side of the unit and rinse in warm water until water runs clear. Wait until filter is completely dry before replacing back
STEP 3: PLACEMENT WHEN TANNING
Where possible position the I Tan Mini compressor behind the Tanning Technician during a tanning session. This will ensure the unit stays cleaner for longer.
STEP 4: UNPLUG FROM THE WALL
When you have finished tanning for the day ensure the cord is removed from the power point
Regular cleaning of your Gun with Black Magic Tan HVLP Gun Wash not only keeps your gun free from DHA Build Up and Colour Residue, it also helps maintain gun lubrication.
TIPS & TRICKS
MUST HAVE TANNING TOOLS
Being prepared for tanning emergencies will make your life a lot easier. Especially if it’s on an important day in the life of your client such as their wedding day!
Thank you for choosing Black Magic Tan.
To register your warranty and ensure your details are available in the unlikely event you have an issue please register at:
Please keep your proof of Purchase and User Manual in a safe place as you will require these to make a warranty claim. Prior to making acclaim you should read through the trouble shooting section in the manual and contact your supplier via phone.
Any warranty claims should be made directly to your supplier.
If within one (1) year from the date of purchase, the product fails due to a defect in material or workmanship, we will repair if possible or replace it free of charge with a comparable unit which may be new or refurbished. This warranty applies only to the original purchaser and is not transferable. The goods must be returned to the seller with proof of purchase to be assessed at the purchasers cost.
Warranties shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care. The manufacturer shall not be obligated under these warranties:
A. To repair damage resulting from attempts by personnel other than authorised representatives to install, repair or service the product;
B. To repair damage, malfunction, or degradation of performance resulting from improper use or incompatible solution;
C. To perform maintenance or cleaning or to repair damage, malfunction, or degradation of performance resulting from failure to perform user maintenance and cleaning as prescribed;
D. To repair damage, malfunction, or degradation of performance resulting from use of the product in an environment not meeting the operating specifications.